1. Durable Protection:
   • Long-Lasting Shield: Our Ceramic sealants form a strong, protective layer on your boat’s surface. This layer helps defend against harsh marine environments, including saltwater, UV rays, and pollutants.
2. Enhanced Water Repellency:
   • Hydrophobic Properties: Our Ceramic sealants create a hydrophobic surface that repels water. This reduces the likelihood of water spots, stains, and streaks.
   • Easier Cleaning: The repellent nature means that dirt, grime, and algae are less likely to adhere to the surface, making cleaning easier and less frequent.
3. UV Protection:
   • Fading Prevention: Our Anti UV sealant protects against UV rays that can cause the boat’s gel coat or paint to fade and degrade. This helps maintain the boat’s aesthetic appeal and resale value.
4. Corrosion Resistance:
   • Saltwater Protection: Our Anti Corrosion Ceramic sealant provides a barrier against the corrosive effects of saltwater. This is particularly beneficial for the metal and fiberglass parts of the boat.
5. Gloss and Shine:
   • Enhanced Appearance: The sealant provides a glossy finish that enhances the boat’s appearance and makes it look well-maintained.
   • Long-Lasting Shine: The Gloss from our Ceramic sealants lasts longer than traditional waxes, reducing the need for frequent reapplication.
6. Reduced Maintenance:
   • Less Frequent Waxing: Unlike traditional waxes, which need regular reapplication, our Ceramic sealants last for years, depending on the environment they are kept in.
   • Simplified Cleaning: The reduced adhesion of contaminants means that routine cleaning is quicker and easier.

1. Preparation:
   • Cleaning: Thoroughly clean the boat to remove any dirt, grime, and marine growth. Use a boat-specific cleaner if necessary.
   • Decontamination: For a smooth application, you might need to use a clay bar to remove embedded particles from the surface.
   • Polishing (if necessary): If the surface has oxidation or minor scratches, polish it to ensure a smooth base for the sealant.
2. Application:
   • Choose the Right Product: Apply our Anti UV coating first to all metal, gel coat and hard plastic parts. Then apply our Anti Corrosion Ceramic sealant to the same items to give maximum double protection. 
   • For Fabric and Vinyl interior:  Apply the Anti Corrosion ceramic sealant by spraying directly onto a microfiber and wiping over the surface until it disappears.  The sealant is fully cured in twenty-four hours and will provide an effective hydrophobic surface.
   • Follow Instructions: Apply our sealants according to our instructions. Typically, you’ll apply it in small and controlled sections at a time.
   • Buffing: After applying the sealants, you can buff hard surfaces to ensure an even finish and remove any excess product.
   • Choose a Quality Product: Our Ceramic sealants are designed for marine use.
3. Curing:
   • Allow to Cure: Let the coating cure according to our product’s instructions. Curing times can vary, but it’s generally a good idea to keep the boat out of the water for a few hours and do not apply detergent for 72 hours.

• Regular Cleaning: Wash the boat regularly to maintain the effectiveness of the sealant. Use a mild, pH-neutral cleaner to avoid damaging the coating.
• Avoid Harsh Chemicals: Steer clear of strong cleaners or abrasive tools that could damage the coating.
• Inspect Periodically: Check the treated areas periodically for any signs of wear or damage and reapply our sealants if necessary.
• Avoid Abrasives: Use soft cloths or sponges when cleaning to avoid scratching the treated surface.

Applying a ceramic sealant can significantly enhance your boat’s appearance and protection, making it a worthwhile investment for any boat owner. If you need more information on specific products or further advice, feel free to ask!